LAUNDRY SOLUTION SX071000A, Руководство пользователя

Страница: 16 / 27

SX071000A Washer-extractor Controller
6 ParameterNote: All parameters have already been configured for the machines in factory.
Don’t intend to modify any parameter without any special requirement. Some modification will
lead to abnormal work.
After power is on, the LCD shows the startup interface . Press [Up] and [Down] button at the same
time during the 10 seconds counting down. Enter the password:

In passwords enter page, once a button pressed, a “*” will be displayed on the LCD. [START] is
used to delete and [STOP] is used to exit.

Default factory password is : [COLD WATER], [HOT WATER], [HEAT], [LEVEL], [SUPPLY1],
[SUPPLY2], [SUPPLY3], [DRAIN]. factory password can be used to set all the items of
parameters.

Default user password is: [SUPPLY3], [SUPPLY2], [SUPPLY3], [SUPPLY2], [SUPPLY3],
[SUPPLY2], [SUPPLY3], [SUPPLY2] User password can only be used to set the items with “end
user” level.
After enter the correct password, you can enter into parameters setting interface.

Press [ ↑ ] or [ ↓ ] button to select setting item and press [ENTER] button to enter into the selected
item.

Select the sub-item by pressing [ ↑ ] or [ ↓ ] button. Press [ADD] or [SUB] button to set the value.
After modification, press [CANCEL] button to exit and then press and hold [CANCEL] button for 3
seconds to reserve the modified value and exit to the idle page.
6.1 Parameter initialization
On thetop menu Of parameter setup interface, press [
↑
] or [
↓
] button to select “1:Set to defaults”
and press [ENTER] button to enter into this item.
Press [ ↑ ] or [ ↓ ] button to select “1: Parameter to defaults” and press [ENTER] button to reset all
the parameters to default value.
Press [ ↑ ] or [ ↓ ] button to select “2: Program to defaults” and press [ENTER] button to reset all the
programs to default value.
6.2 Machine parameter setup
On the top menu Of parameter setup interface, press [
↑
] or [
↓
] button to select “2:Machine setup”
and press [ENTER] button to enter into this item.
11/
Input password(8 bit):