LAUNCH
X-631/X-631+
Installation and Parts Manual Structure
6
Turn the adjusting knob to adjust the span between wheel claws, and then attach the clamp to the wheel rim. Adjust the
knob to make the wheel clamp fixed on wheel rim tightly. Use the wheel clamp tie to bind the wheel clamp and the wheel
rim together.
The installation of wheel clamp is crucial to the test result. The claws should be in even contact with the wheel rim without
touching the lead weight.
Avoid hitting during operation. Otherwise, distortion may be caused and the test result may be influenced.
Fig.3.4
Wheel Clamp Hanging Brackets
X-631/X-631+ wheel aligner is equipped with 4 wheel clamp hanging brackets as shown in Fig.3.5.
Fig.3.5
After unpacking, it is necessary to install these 4 hanging brackets on left and right side wall of the cabinet.
Turntables
X-631/X-631+ has two mechanical turntables (standard configuration, see Fig.3.6).
Fig.3.6 mechanical turntables
When testing, the turntables should be placed at the front wheel position of vehicle on the lift.
Use the lock pin to lock the turntable before driving the vehicle on. Pull out the lock pin after the vehicle is stopped and the
front wheels are at the center of the turntables.
While testing, try your best to keep the vehicle front wheel at the center of the turntable.
Содержание X-631
Страница 1: ......
