![background image](http://html1.mh-extra.com/html/launch/twc-711/twc-711_manual_3883729012.webp)
LAUNCH TWC-711TMB Tire Changer User's Manual
6
Figure 2-7 Figure 2-8
Note:
¾
If splitting is blocked, vehicle should be stopped immediately, push up the turntable rotating pedal with foot to allow
turntable rotate counterclockwise to eliminate obstacles.
¾
If there is inner tube during operation of this step, it is suggested to operate with a distance of about 10cm from the
right ride of the tire valve.
6. If there is inner tube, take it out.
7. While splitting another side of bead, place it onto the pneumatic control hook, allow turntable to rotate clockwise till all the
bead is taken out, as shown in figure 2-9 and 2-10.
Figure 2-9 Figure 2-10
2.3 Mounting
Preparation work
Check the dimensions of tire and rim to see if they are the same;
Clean the rim, check whether there is dust or distortion, etc in the bead seat;
Check whether the bead is distorted or bent, etc.