Launch CRT 501 Series, Руководство пользователя

Страница: 31 / 47

LAUNCH CRT 501 Series User Manual
25
LAUNCH-sensor. It is used after the original sensor is triggered.
Tap
Programming
to enter the following screen.
Select the specific wheel position and tap Copy by Activation to retrieve the
information of the original sensor. After the information is retrieved, it will be
displayed on the screen.
Place a LAUNCH-sensor close to the TPMS antenna of the tool, tap
Programming to start writing the retrieved sensor information to the LAUNCH-
sensor.
After the sensor is successfully programmed, it will appear on the screen.
Notes: Once programmed with
Copy by Activation
, the LAUNCH-sensor
can be installed in the wheel directly to be mounted on the vehicle and the TPMS
warning light will turn off.
5.2.4 Copy by OBD
This function allows users to write in the saved sensor information to the
LAUNCH sensor after performing
Read ECU ID
. This function requires a
connection with the vehicle’s DLC port.
Follow the steps below to proceed:
1. Tap the
Activate tab to enter the following screen.