Lauda Versafreeze VF 15040, Руководство по эксплуатации

Страница: 10 / 44

10 / 44 Versafreeze Freezer Cabinets 07/2021
Freezer cabinets installed under tabletops must be positioned a minimum of 60 mm away from other appliances or walls so
that the aspirated cooling air can circulate freely. Once the freezer cabinet has been moved to its place of installation, it
must be secured in position with the locking feet

. The locking feet are positioned at a distance of approx. 40 mm from
the side walls under the front of the appliance. Use the wrench supplied to unscrew the feet by turning clockwise until they
are resting securely on the ground. It should now no longer be possible to move the appliance on the casters

.
Caution!
Due to the nature and quantity of the refrigerants used, naked flames are prohibited within a radius of 1 m
of the appliance.
5 Operating voltage and electrical connection
A marked equipotential bonding connection is located on the back of the freezer cabinet. Local regulations may stipulate
the need to connect the appliance to a grounding network for equipotential bonding. Please check before commissioning
the appliance.
The operating voltage and the mains frequency on the type plate (right side wall, top left) must
match the power supply specifications.
The main switch on the refrigeration system must switched off (position 0). Once these conditions
have been met, establish the electrical connection.
The refrigeration system may only be operated on a correctly installed power connection with a protective
earth conductor (PE) that complies with local regulations.
It must be possible to disconnect all poles of the power supply from the power network (e.g. via an earthed
socket or switch).
Off
On