Lauda UWT Series, Руководство по эксплуатации

Страница: 7 / 28

UWT circulation heat exchangers
YAWE0029 / 29 June 2018
Safety notes
5
1 Safety notes
1.1 General safety notes
A circulation heat exchanger is used to cool and circulate heat transfer liquids as specified. This leads to
hazards due to the emission of heat transfer liquid and / or of cooling liquid and to general hazards due
to the use of electrical energy.
The user is largely protected through the application of the appropriate standard specifications.
It is not possible to cover all possibilities; they remain largely within the responsibility and the judgement
of the user.
The unit must only be used as intended and as described in these operating instructions. This includes
operation by suitably instructed qualified personnel.
The units are not designed for use under medical conditions according to DIN EN 60601-1 or
IEC 601-1!
Classification in accordance with EMC requirements
Device Immunity Emissions class
Customer power
supply
Circulation heat
exchangers
UWT 3000, UWT 6000,
UWT 10000
Type 2 in accordance
with
DIN EN 61326-1
Emissions Class B
in accordance with
CISPR 11
Worldwide
No limitation
For the USA only:
Instructions for Class A digital devices
“This equipment has been tested and found to comply with the limits for Class A digital device, pursuant
to Part 15 of the FCC (Federal Communication Commission) Rules. These limits are designed to pro-
vide reasonable protection against harmful interference when the equipment is operated in a commer-
cial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to co
rrect the interference at his own expense.”
“This device complies with Part 15 of the FCC (Federal Communication Commission) Rules. Operation
is subject to the following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause undesired
operation.”
For Canada only:
“This Class A digital apparatus complies with Canadian ICES-003” (ICES = Interference Causing
Equipment Standards).
« Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada ».