Lauda Proline RP 1290 C, Руководство по эксплуатации

Страница: 48 / 120

Proline Edition X cooling thermostats
48
Starting up
YACE0100 / October 4, 2018

Enter the desired limit temperature.

Accept the change with ,

or quit the window with without making
changes.
7.8.4 Setpoint offset operating mode
With this function it is possible to apply an offset value to the temperature provided by the external
temperature probe or a module and then to use it as the setpoint. The bath temperature can, for
example, be operated at -25 °C below the temperature of a reactor, which is being measured by the
external temperature probe.
Master
SEtq.
3x to
MNEnu
to
PArA
5x

SEtq.
in the following submenu, the relative setpoint (Set)
and the source of the actual value can be entered.

Continue with .

The offset operating mode is currently deactivated.

To activate it press and with change to
EP
(external Pt100),
EA
(external via analog module) or
ES
(external via serial
module).
Wait 4 seconds or

Display flashes 4 s

new value is automatically accepted, or

value is immediately accepted with the Enter key.

Continue with . The left-hand window is displayed.

To activate the relative offset input press and change the value
with or .
Wait 4 seconds or

Display flashes 4 s

new value is automatically accepted, or

value is immediately accepted with the Enter key.
Help Menu Screen T
set
T
fix
6 7 8 9 0
1 2 3 4 5
Lower limit (T il)
-50.
0
Min: -50.0 °C Max: 301.0 °C
SEtq. °C
r 0FF
°C
r0FFS
°C