Lauda P 10, Руководство по эксплуатации

Страница: 40 / 160

9.
Test the connection with
Ä
“Checking the LAN network”
on page 40 or
Ä
“Check the LAN network and the process inter-
face” on page 41.
1.
Start the Windows command processor by entering
cmd.exe
@
on
the PC with Microsoft Windows operating system.

The entry window will open.
2. There are two ways of checking:

Enter the ping command together with the IP address.
ping XXX.XXX.XXX.XXX
@
For "XXX.XXX.XXX.XXX", put the IP address that was entered
when the Ethernet interface was configured.
Or

Enter the ping command together with the serial number of the
thermostatic circulator (possible with software control system
1.36 or later).
ping serial number
@

If the Ethernet interface is configured and connected correctly,
the interface will return four responses within a very short time.
See Fig. 18.
Fig. 18: Example for entering the ping command
Checking the LAN network
V6 PRO bath thermostats and circulation thermostats 40 / 156