Lauda ECO Silver E 10 S, Руководство по эксплуатации

Страница: 47 / 128

10/2019 i
ECO Silver 47 / 124
7.3 Display representation
–
The ECO thermostats offer you intuitive menu guidance. In the following the possible window views and the sym-
bols used are explained.
7.3.1 Basic window
–
Basic window in the normal display
–
The following information is displayed depending on the operating
status:
T
set
;
T
int
T
ext
DISPLAY;

MENU,
STOP.
–
Pump runs with displayed pump level;
–
Heater is active;
–
Chiller is active;
–
Set-point temperature;
–
Current bath temperature;
–
Temperature of the external application (if external
temperature sensor is connected);
–
Soft-key bar; function call via associated keys;
–
Apart from the normal display of the basic window, there is another display. This includes in addition a further status
display. With the soft-key bar activated changeover between the two display representations is obtained by pressing
the left soft key. With both displays the soft-key bar disappears if no key has been pressed for at least ten seconds.
The display of it can be reactivated by pressing any key.
–
Basic window in the expanded display
–
The following information is displayed depending on the operating sta-
tus:
T
int
T
set
T
ext
DISPLAY,

MENU,
STOP
–
Pump runs with displayed pump level;
–
Heater is active;
–
Chiller is active;
–
Current bath temperature;
–
Set-point temperature;
–
Temperature of the external application (if external
temperature sensor is connected);
–
Soft-key bar; function call via associated keys;
–
With a connected external sensor and its selection as the control variable, the basic window with the expanded
status display is always active.
29
.73 °C
T
ext
1
29.85 T
int
30,00 T
set
DISPLAY

MENU STOP
29.
73 °C
1 30.00 °C T
set
T
int
DISPLAY

MENU STOP