Lattice Sentry Demo Board for MachXO3D
4
3
5
Powering the Board & Observing the Demo Program
Connect the supplied power adapter to the 12 V DC power input (J11) on the board. A
few LEDs should light, indicating the board is powered.
The LEDs next to the MachXO3D-9400C device (D3-D12) should move through a series
of patterns before settling on 0110 0110 within a few seconds. This indicates that all three
FPGAs are configured correctly. There will also be a blinking status LED next to each
ECP5-85F (D53, D39) indicating the demo program is running.
Installing the software
The Board is pre-programmed with a basic demonstration.
To develop your own solutions, download and use the Lattice Diamond software (version
3.11, SP1 or SP3 or later), downloadable from www.latticesemi.com/software.
If you only need to re-program to board, you can use the Diamond Programmer stand-
alone software (version 3.11.2 or later). You can download this at
.
Doing More with the Lattice Sentry Demo Board for MachXO3D
www.latticesemi.com/sentryboard1
User’s Guide, PC-based software tools to interact with the demonstration program, and
other resources.
Additional Terms and Conditions Applicable to Lattice Programming and Development Hardware
Lattice device programmers, programming cables, socket adapters, and other hardware sold for use in conjunction with Lattice
software (“Programming Hardware”) and Lattice evaluation boards and development kits sold for use in conjunction with
evaluating Lattice products (“Development Hardware”) are designed and intended for use solely with semiconductor components
manufactured by Lattice Semiconductor Corporation. Programming and Development Hardware is warranted to meet Lattice
specifications only for a period of ninety (90) days; in all other respects the terms and conditions of sale of Programming and
Development Hardware shall be Lattice’s standard terms and conditions set forth in Lattice’s Sales Order Acknowledgment.
Additionally, Lattice specifications for Programming and Development Hardware limit their use to low-volume engineering
applications only, and not for volume production use. The warranty for Programming and Development Hardware will not apply to
any Programming or Development Hardware used in production, used with worn or improperly installed hardware, or used with
incompatible systems or components.
Technical Support
Copyright © 2020 Lattice Semiconductor Corporation. Lattice Semiconductor, L (stylized) Lattice Semiconductor Corp., Lattice
(design) are either registered trademarks or trademarks of Lattice Semiconductor Corporation in the United States and/or other
countries. Other product names used in this publication are for identification purposes only and may be trademarks of their
respective companies.
QS051 V1
August 2020
