MachXO2 Pico
Development Kit
Assemble and Connect to the MachXO2 Pico Evaluation Board
In this step, power the board and connect it to your PC using the USB cable provided.
1. Connect the USB cable provided from a USB port on your PC to the board’s USB interface
socket on the bottom of the board as shown in the layout diagram below.
MachXO2 Pico Evaluation Board Layout Diagram
2. If you are prompted “Windows may connect to Windows Update” select
No, not this time
from available options and click
Next
to proceed with the installation. Choose the
Install
from specific location (Advanced)
option and click
Next
.
3. Select
Search for the best driver in these locations
and click the
Browse
button to navi-
gate to the Windows driver folder created in Step 2 of this QuickSTART Guide. Select the
CDM 2.04.06 WHQL Certified
folder and click
OK
.
4. Click
Next
. A screen will display as Windows copies the required driver files. Windows will
display a message indicating that the installation was successful.
5. Click
Finish
to install the USB driver.
USB
Interface
Socket
2x16
GPIO
Header
LED
Screen
MachXO2-
1200/640
Coin Battery
Slot
Capacitive
Touch Buttons
GSR Push-button