Lattice Semiconductor HM01B0 UPduino Shield, Руководство пользователя

Страница: 8 / 15

Key Phrase Detection on HM01B0 UPduino Shield Demonstration
User Guide
© 2019 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal .
All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
8 FPGA-UG-02094-1.0
Figure 4.4. Radiant Programmer – iCE40 UltraPlus Device Selection
8. Click the iCE40 UltraPlus row and select Edit > Device Properties.
9. In the Device Properties dialog box, apply the settings below that are common to the three files to program.
a. Under Device Operation, select the options below:

Target Memory: External SPI Flash Memory

Port Interface: SPI

Access Mode: Direct Programming

Operation: Erase, Program, Verify
b. Under SPI Flash Options, select the options below:

Family: SPI Serial Flash

Vendor: Winbond

Device: W25Q32

Package: 8-pin SOIC
10. To program the bitstream file, select the options below as shown in Figure 4.5.
a. Under Programming Options, select the key phrase RTL bitstream file in Programming file.
b. Click Load from File to update the Data file size (Bytes) value.
c. Ensure that the following addresses are correct:

Start Address (Hex): 0x00000000

End Address (Hex): 0x00010000
d. Click OK.