Himax HM01B0 UPduino Shield
User Guide
© 2018 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at
www.latticesemi.com/legal
.
All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
FPGA-UG-02081-1.0
11
Figure 6.3. Onboard SPI Flash Device Properties Settings
7.
Click
OK
to close the Device Properties window.
8.
Click the
Program
button in Radiant Programmer to program the Onboard SPI Flash.
6.3.
Programming the CRAM Directly
To program the CRAM directly:
1.
Set board resistors to vertical for CRAM Programming.
2.
Connect the Himax HM01B0 UPduino Shield via USB cable to PC with Radiant Programmer installed.
3.
Start Radiant Programmer.
4.
Set
Device Family
to
iCE40 UltraPlus
and
Device
to
iCE40UP5K
as shown in
Figure 6.4
.
5.
Click the iCE40 UltraPlus row, and select
Edit > Device Properties
.
