Lattice Semiconductor ECP5 Versa Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 86

background image

ECP5 and ECP5-5G High-Speed I/O Interface

Technical Note

© 2014-2020 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at

www.latticesemi.com/legal

All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.

FPGA-TN-02035-1.3

11

3.

High-Speed I/O Interface Building Blocks

ECP5 and ECP5-5G devices contain dedicated functions for building high-speed interfaces. This section describes when
and how to use these functions. A complete description of the library elements, including descriptions and attributes, is
provided at the end of this document.

shows a high-level diagram of the clocking resources available in the ECP5 and ECP5-5G devices for building

high-speed I/O interfaces.

Figure 3.1. ECP5 and ECP5-5G Device Clocking Diagram

A complete description of the ECP5 and ECP5-5G device family clocking resources and clock routing restrictions are
available in

ECP5 and ECP5-5G sysClock PLL/DLL Design and Usage Guide (FPGA-TN-02200)

Below is a brief description of each of the major elements used for building various high-speed interfaces. The

Software Primitives and Attributes

section of this document describes the library elements for these components.

3.1.

Edge Clocks

Edge Clocks (ECLK) are high-speed, low-skew I/O dedicated clocks. They are arranged in groups of two per I/O bank on
the left and right sides of the device. Each of these Edge Clocks can be used to implement a high-speed interface. There
is an Edge Clock Bridge (ECLKBRIDGECS) that allows you to build large interfaces by bridging the Edge Clocks from one
bank to the other on the same side or from one side to the other side.

3.2.

Primary Clocks

Primary Clocks (PCLK) refer to the system clock of the design. The SCLK ports of the DDR primitives are connected to
the system clock of the design.

3.3.

DQS Lane

A DQS Lane uses the embedded circuit for memory interfaces. Each DQS Lane provides a clock pair (DQSP and DQSN)
for the DQS strobe and up to 12 to 16 ports for DQ data and DM data mask signals. The number of DQS Lanes on the
device is different for each device size. ECP5 and ECP5-5G devices support DQS lanes on the left and right sides of the
device.

«
...
9
10
11
12
13
...
»

Содержание ECP5 Versa























































































Отзывы:

Нет отзывов

Похожие инструкции для ECP5 Versa

Бренд: FENDT Страницы: 31

Бренд: Wavetek Страницы: 74

Бренд: Fairchild Страницы: 16

Бренд: PANDROL Страницы: 36

Бренд: IFM Страницы: 175

Бренд: IFM Страницы: 5

Бренд: Raymarine Страницы: 124

Бренд: Raymarine Страницы: 192

Бренд: Rane Страницы: 38

Бренд: Kartsana Страницы: 36

Бренд: Omlet Страницы: 2

Бренд: Omicron Страницы: 382

Бренд: Omicron Страницы: 188

Бренд: Qiagen Страницы: 48

Бренд: Qiagen Страницы: 162

Бренд: Qazqa Страницы: 4

Бренд: Qlightec Страницы: 12

Бренд: QRS Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды