STRATA_HEAT™ floor heating system is the most advanced radiant underfloor heating system available in the world.
Consisting of a high-performance floor heating wire, an uncoupling mat, a Wi-Fi enabled thermostat and the world’s first heat
conductive thin-set additive – the system provides you with the most advanced and efficient floor heating system for your next
installation. As these units are advanced systems, this guide is to outline how to properly register the smart thermostat or
operate the unit manually.
Registering a Wi-Fi STRATA_HEAT Thermostat to be controlled via the Smartphone
App.
1. Find out what unit they have:
Does the unit have Screws on the side or bottom
?
If Yes
This is the older version of the T-Stat (Device number can be used to Register)
If No
This is the newer version of the T-Stat (QR Code must be used to Register)
If the newer version of the thermostat is being used: Choose the Type Below
Registering and Manual Setup of a
STRATA_HEAT Thermostat
TDS 263
Is the thermostat White with up/down
arrows and a check mark/ X on the
face?
This is the Strata Heat Wi-Fi
Thermostat. It can be used manually or
with Wi-Fi and registered to utilize the
app and web page.
Is the thermostat a touchscreen with a
+/- sign next to the temperature?
This
is the Strata Heat Smart LCD
Thermostat. It can be used manually or
with Wi-Fi and registered to utilize the
app and web page.
