Step By Step Instructions
Routing the Ropes
Begin on the motor end. Bend a small curve
into the end of the rope.
Insert the rope into the side of the first
pulley. Push the rope behind that pulley
and out along the far side of the second
pulley.
On the non-motor end, run the rope around
the pulley and out the back channel of the
pulley assembly. Pull this rope along the
backside of the cover box to the motor end
pulley assembly. Be sure to route the rope
in front of the lid brackets.
Insert the rope from the non-motor end
into
the channel behind the first pulley on
the motor end. Push the rope behind all
three pulleys and out of the channel behind
the
pulley
.
Continue pulling the excess rope through
the pulleys.
T
he ropes routed through pulley assembly
should now look like this.
11
12
13
16
17
18
10
© Latham Pool Products, Inc. 201
9
. All rights reserved.
15
14
Bend a small curve in th
e
rope
.
Insert the rope through the top of the front
vertically mounted pulley and pull back
through the bottom.
Insert the second rope in the same way into
the other vertical pulley.
12
