Latento XP Series, Инструкция по монтажу

Страница: 26 / 60

26
Storage water not heating

In case of conventional and regenerative reheating:
– Has the stainless steel heat exchanger been correctly connected?
– Check the boiler circuit for disturbances.
– Check pressure.
– Check circulating pump for function – trapped air.
– Check of regulation. Are heat generators, pumps and temperature
sensors connected correctly?
– Are the temperature sensors positioned at the right
height and functional?
Loss of storage water

Is the storage tank cover closed with the clamps?

Check the storage tank cover – tight?

Is the drain valve on the lower front screw down mounting tight?
Pressure drop in the system

Pressure drop in the first weeks through escaping dissolved
air is normal!

Pressure fluctuations of up to 0.3 bar are normal during operation!

Check system for leak tightness.

Check safety valve for correct installation, leak tightness and function.

Was the bleeding valve shut again after filling?
10. Troubleshooting and remedy