Operating Procedures
Emissions Monitoring - Regeneration
Operating Procedures
8/18/20
4-13
4
REGEN PROGRESS
During the parked regen, the message Regen Starting will appear followed by a progress
status bar.
This bar will remain at a maximum of 10% until the engine achieves the desired tempera-
ture for soot/ash elimination.
At the end of the process, the controller will prompt the operator that the regeneration has
been completed. The operator must acknowledge this by pressing the Enter button prior
to resuming normal operation and loading the engine.
REGEN FAIL / ABORT
The regen process will be aborted if either the Neutral Switch or the Parking Brake cir-
cuits open during the process. When this occurs, a message will appear requiring the
operator’s acknowledgement.
The condition causing the abort will need to be rectified and the regen process reinstated
from the beginning.
If a regen fails or aborts, the controller will post a message such as Regen Failed or
Regen Aborted. Each screens will require the operator’s acknowledgment. When these
circumstances occur, the operator should contact a dealer for instructions.
