manualshive.com logo in svg

Lastec 621ER, Руководство пользователя

Поделиться
Скачать
Lastec 621ER Скачать руководство пользователя страница 30

Initial Set-Up

PTO Shaft Range Verification

3

3-6

Lastec//021819

Initial Set-Up

another. (An example would be with the tractor on level ground, and the Articulator posi-
tioned in a ditch heading uphill toward level ground. This should represent your maximum 
PTO shaft extension.

11.

Turn off the tractor, disengage the PTO, shift the transmission into neutral, and set the 
parking brake.

12.

The PTO shaft should maintain a minimum engagement of 1/2 of the total compressed 
shaft length.

13.

If the PTO shaft maintains at least 1/2 shaft engagement, your maximum extension will be 
within the proper range of the PTO shaft.

14.

If the PTO shaft does not maintain at least 1/2 shaft engagement, you will not be operat-
ing within the proper range of the PTO shaft. You will need to either avoid this area when 
cutting, or install a longer PTO shaft.

15.

If you install a longer PTO shaft, you will need to re-check the maximum compression, to 
see that you are still operating within the proper range of the PTO shaft.

Содержание 621ER




















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды