manualshive.com logo in svg

Lastec 521EH, Руководство пользователя

Поделиться
Скачать
Lastec 521EH Скачать руководство пользователя страница 35

Initial Set-Up

Deck Wheels

Initial Set-Up

Lastec//021819

3-11

3

3.11 Deck Wheels

Verify proper function of all mower deck wheels. The wheels should turn freely without 
excessive side-to-side motion, and be free of debris. Clean, adjust, or replace as neces-
sary.

Check that each yoke wheel swivels freely in the shaft pivot collar, and the bushings are 
in good condition. If any wheel does not swivel freely, clean and grease the shaft collar 
assembly. Replace the bushings if necessary.

Grease each wheel after 8 hours of use and replace any worn or damaged tires. 

3.12 General

Verify that all warning decals are in place, visible and legible. 

Verify that all covers and safety devices are properly installed and fastened. 

Check that the discharge chute is clear of debris, properly mounted, and in good condi-
tion.

Inspect entire Articulator for loose or entangled parts, debris, obstructions, neglected 
tools, or any other possible safety hazards, equipment hazards or projectile hazards.

Содержание 521EH





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды