manualshive.com logo in svg

Lastec 3372, Руководство пользователя

Поделиться
Скачать
Lastec 3372 Скачать руководство пользователя страница 37

Initial Set-Up

Blades

Initial Set-Up

Lastec Mower 3372/011305

3-13

3

3.15 Blades

DANGER!

NEVER inspect, adjust, change, or perform any other maintenance to the blades
while the engine is running!

ALWAYS turn off the blades, turn off the engine, remove the key, and set the park-
ing brake before attempting to inspect, adjust, change, or perform any other mainte-
nance to the blades!

Keep all personnel clear of all controls while inspecting, adjusting, changing, or per-
forming maintenance to the blades!

The Lastec Mower 3372 utilizes three (3) individual 25” high-lift blades. 

NEVER go near, or expose yourself or others in any way to the blades while the engine is running!

ALWAYS turn off the blades, turn off the engine, remove the key, and set the parking brake before
attempting to inspect, adjust, change or perform any other maintenance to the blades!

Keep all personnel clear of all controls while inspecting, adjusting, changing, or performing
maintenance to the blades!

Inspect all blades for proper installation, orientation, tightness, sharpness, and overall condition.
Tighten the bolts that hold the blade on to a recommended torque value of 75 ft-lbs of pressure.
Be sure the lift fins are oriented to the top of the blades. Verify that the mount bolts are secure, the
blades are sharp, and free of any nicks, cracks, or bends. Always replace any damaged, dull,
cracked, or missing blades before operating the Lastec Mower.

Lastec also offers low-lift blades and mulching blades for certain mowing applications. Contact
your Lastec Mower dealer for further information about optional blades available.

3.16 Operator Seat

Check that the operator seat pan is properly latched and operator seat is secure. Be sure the
seatbelt is secure and operable.

Adjust the seat forward or back so that the operator can easily reach the control panel, steering
control arms, and mower deck height adjustment pedal.

Danger

Go to www.lastec.com for latest changes in this manual.

Содержание 3372





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды