Lastec 325EFJ Скачать руководство пользователя страница 14

Safety Information

Storage Safety Rules

Safety Information

325EFJ/Odoc100499

2-6

2

l

Keep the tractor engine area free of accumulated debris, fuel, or excess grease and
oil to reduce fire hazard.

l

Keep the Articulator in good operating condition with all safety devices in place.

l

Check the blades frequently.  Verify that they are sharp, free of nicks and cracks,
and securely fastened.

l

Periodically tighten all bolts, nuts and screws and check that all fasteners are prop-
erly installed to ensure the tractor and Articulator are in safe operating condition.

l

Upon completing any maintenance or service function, verify that all safety guards
and devices are properly installed before operating the tractor or Articulator.    

l

Verify that all warning labels and decals are properly installed, visible, and legible.

l

Always remove debris from the top and bottom of  the Articulator after each use.

2.7

Storage Safety Rules

l

Never store the Articulator in any area accessible by children.

l

Never allow extended running of any engine indoors.  Exhaust fumes are deadly.

l

Never store tractor with fuel in the tank inside a building where fumes could reach
an open flame or spark.   

l

Allow the tractor engine to cool before storing in an enclosed area.   

l

Remove all accumulated debris from the tractor, and both the top and bottom of the
Articulator before storing.   

l

Sand chipped or scratched areas and re-paint them to prevent rust during storage.   

l

Lubricate all moving parts of the tractor and Articulator to prevent rust during stor-
age.

NEVER allow the extended running of tractor engine indoors!  Exhaust
gasses contain carbon monoxide, an odorless and deadly poison!
NEVER allow children on or around the Articulator!

Go to www.lastec.com for latest changes in this manual.

Содержание 325EFJ































Отзывы: