Laski FZ560T-RC, Руководство по эксплуатации

Страница: 31 / 35

3 1
Grease cups of V-belt gearing in suspension box wall
Lubrication every 50 running hrs
Replacment of Blades and Regrinding
Blades edge regrinding requires high demands for
keeping optimal cutting edge shape. While grinding
it is necessary to keep its optimal geometry. The right
shape prolongs blade service life.
While regrinding it is necessary to keep the same
weight of particular blades because of balance of
their rotating mass. For grinding use always a grinder
with a magnetic table and a special fixture. We
recommend calling the manufacturer Laski s.r.o. for
assistance.
When reassembling, be aware that the blades are in
pairs as the RH and LH ones. In addition to that they
can be straight or bent.
Replacement of the LASKI blades:
-
Loosen the bolts (10).
- Replace the blades by new ones.
- Tighten the new blades slightly.
- Use the torque wrench and tighten the bolts with a torque of 110 Nm.
- For replacement of worn or damaged blades use always original Laski blades and bolts
only (10).
- While replacing, proceed very carefully.
- Before replacement the machine must be secured against overturning.
- Be aware that the Laski blades are not fully interchangeable with each other. Do not
confuse the right with left ones and the straight with bent ones.