Manual: Laserworld Purelight Series
page 17 / 28
English
(2) Professional Mode
Channel
Mode
Value
Function
1 Intensity
Prof.
0
Laser off
1 - 255
Increase intensity (full intensity = 255)
2 Pattern selection
Prof.
0
Blackout (000.ild must not exist)
1 - 255
Display patterns from SD card:
1 = 001.ild
2 = 002.ild
... and so on
If no pattern is assigned to a number = blackout
3 Pattern speed
(Framerate)
Prof.
128
Standard speed 50 fps
0 - 127
Increasing speed from 0 fps tp 50 fps
129 - 255
Increasing speed from 50 fps to 100 fps
4 Position X-axis coarse
Prof.
0 - 255
From left (0) to right (255); center = 128
5 Position X-axis fine
Prof.
0 - 255
6 Position Y-axis coarse
Prof.
0 - 255
From bottom (0) to top (255); center = 128
7 Position Y-axis fine
Prof.
0 - 255
8 Rotation coarse
Prof.
0 - 255
Rotate; 0° = 128
9 Rotation fine
Prof.
0 - 255
10 Size X-axis
Prof.
0 - 255
From maximum (0) to minimum (255)
11 Size Y-axis
Prof.
0 - 255
From maximum (0) to minimum (255)
12 Inversion
Prof.
0 - 63
None
64 - 127
Invert X-axis
128 - 191
Invert Y-axis
192 - 255
Invert X + Y-axis
13 Color Selection
Prof.
0 - 15
Original pattern colors
16 - 207
Color selection from red (16) through yellow
(48), green (80), cyan (112) and blue (144) up to
purple (176) with color mixtures in between.
208 - 223
White with half intensity for each color channel
224 - 239
White with full intensity for each color channel
240 - 255
Enables channels 14 -16 to select a specific hue
14 Red
Prof.
0 - 255
Increase intensity red
Only active if the value of channel 13 is 240 - 255
15 Green
Prof.
0 - 255
Increase intensity green
Only active if the value of channel 13 is 240 - 255
16 Blue
Prof.
0 - 255
Increase intensity blue
Only active if the value of channel 13 is 240 - 255
