Manual: Evolution Series ES-800S RGB 3D
page 8 / 18
8. Connect a DMX controller to operate the laser.
9. Use the switches 1 - 9 to set the DMX address of the laser. Each switch represents a num-
ber. To define a number use the preceding number and multipy it by 2:
This laser uses 5 DMX channels, so make sure that the next device uses an address that doesn’t
overlap with this range.
Channel
Value
Function
1
0 - 69
Laser off
70 - 136
Sound mode
137 - 205
Automatic mode
206 - 255
DMX mode
2 & 3 together
0 - 28
no effect
29 - 255
rotation with increasing speed
Pattern selection
4
0 - 255
pattern selection
Strobe
5
0 - 20
no effect
21 - 255
strobe with increasing speed
10. Please note that not each pattern can be combined with each effect.
To turn off the device, press the power switch („OFF“), turn off the key switch and disconnect
the power cable from the mains.
Switch
1
2
3
4
5
6
7
8
9
10
Number 1
2
4
8
16
32
64
128
256
Mode Switch
