Manual: Evolution Series ES-180S RGY 3D
page 8 / 22
8. Connect a DMX controller to operate the laser.
9. Use the switches 1 - 9 to set the DMX address of the laser. Each switch represents a num-
ber. To define a number use the preceding number and multipy it by 2:
This laser uses 13 DMX channels, so make sure that the next device uses an address that
doesn’t overlap with this range.
Channel
Value
Function
1
0 - 64
Laser off
65 - 127
Sound mode
128 - 191
Automatic mode
192 - 255
DMX mode
2
0 - 167
Pattern selection
168 - 255
Animations
3
0 - 255
Flashing patterns with increasing speed
Horizontal movement
4
0 - 167
manual movement
168 - 255
automatic movement with increasing speed
Vertical movement
5
0 - 167
manual movement
168 - 255
automatic movement with increasing speed
Zoom / size
6
0 - 10
no effect
11 - 104
manual size settings
105 - 154
automatic pattern enlargement with increasing
speed
155 - 204
automatic pattern contraction with incresaing
speed
205 - 255
automatic change of enlargement and contrac-
tion with increasing speed
Vertical cross mirroring
7
0 - 150
manual mirroring
151 - 255
automatic mirroring with increasing speed
Switch
1
2
3
4
5
6
7
8
9
10
Number 1
2
4
8
16
32
64
128
256
Mode Switch
