1. Product and package contents
Please check if all listed parts are included and undamaged. Included in delivery:
1 x laser projector
1 x manual
2 x key (for key switch)
1 x power cable
1 x Interlock connector
(already attached)
3. Initial operations, safety instructions
1. Make sure to use
correct voltage
;
see information on device & in this
manual.
2. Make sure that the device is
not
connected to mains
during ins-
tallation.
3. Installation has to be done by
technical experienced and qua-
lified persons
according to safe-
ty regulations of the respective
country.
4.
Always ensure that maximum
permissible exposure (MPE) is
not exceeded in areas accessib-
le to the public or members of
staff.
5. In some countries an additional
inspection by technical control
institutes could be necessary.
6. Connect an
easily accessible inter-
lock connector or circuit breaker
to the projector.
7. The power supply should be easily
accessible.
8. When installing the laser keep
mount it with a minimum distance
of 15 cm from walls and objects.
9. For safe setup e.g. on walls or
ceilings please use a
safety cord.
The safety cord should be able to
withstand tenfold the weight of
the device. Please follow the ac-
cident prevention regulations of
professional associations and/or
comparable regulations for acci-
dent prevention.
2. Preliminary warning notices
1. Please use this device only
according to these operating instructions
.
2. Do not use the device if there are any
visible damages
on housing, connector
panels, power supplies or power cords.
3. This device must not be permanently connected to mains. Disconnect it from
mains or use the power button to
switch if off if not in use
.
4.
Never look directly into the light source
of a laser projector. Danger of dama-
ge to the eyes or even blindness in extreme circumstances!
4.
Do not operate the device at high humidity, rain or in dusty
surroundings.
5.
Protect device against dripping or splashing water.
Do not place
any liquid filled containers near to this device.
Any warranty claims are void if the warranty label is removed or tampered
with in any way.
Содержание EL-120 R
Страница 24: ......