USER MANUAL: DISCO-300G
Date: 01/2008
Page 4 of 9
2. OPERATING DETERMINATIONS
6.
The operator has to make sure that laser radiation – also reflected laser
radiation –higher than the highest allowed level is avoided by technical or
organisational measures.
7.
Make sure that the used voltage is : AC 220V~240V, 50/60Hz
8.
If the device is used in a flying installation, the mounting brackets and an
appropriate safety-rope must be fixed.
9.
Laser effects are not designed for permanent operation. Consistent operation
breaks will ensure that the device will serve you for a long time without
defects.
10.
In some countries, the operator must notify the accidence insurance and the
authority for industrial safety, before operating a laser. For more information,
contact the relevant authorities.
11.
Please consider that unauthorized modifications on the device are forbidden
due to safety reasons!
12.
If this device will be operated in any way differently than described in this
manual, the product may suffer damages and the guarantee becomes void.
Furthermore, any other operation may lead to dangers like short-circuit,
burns, electric shock, etc.
13.
When the laser is not attached to an ILDA output device (even for a short
period), switch ILDA mode off (see below), or turn the device off.
