USER MANUAL: Laserworld Proline CS-500RGY DMX
Date: 01/2008
Page 5 of 10
4. PRODUCT INTRODUCTION
The RGY series projector adopts the latest appearance design to make it compact
and light. The housing use imported paint.
The scanning System is vibratory mirror, DMX-512 Signal 10 channels, international
Standard DMX-512 Signal control. It can printing 2 laser pattern at the same time.
There are 128 latest laser effect patterns in it, can be used for word (Chinese,
English and Japanese)performance^ animation performance^ laser beam
performance, with spatial, projection and animation effects.
Control modes: DMX-512 Signal control, music control „
RGY series laser projector was applied for the place of public entertainment such as
disco, night club and theater etc.
5. FUNCTION INTRODUCTION
RGY series laser performer has the powerful performance functions. Abundance laser
patterns and single color or double colors orthree colors laser performance will bring
you a new sensations, it will be more comfortable and convenient for your using. It
has 10 DMX-512 control Signal control, it can make tunnel effect and animation,
geometric, character and 3D effects, Laser sky effects, Rolling effects, Scanning
effects, and Laser tunnel effects in all directions. And it also has music control. The
effect can be control by music rhythm.
Laser module is semiconductor generator, laser wavelength are 532nm/green and
650nm/red, the two different laser module are combined to give off the yellow laser
light. The laser light source has a long life span and highly stability, complying with
the international Standard.
6. INSTRUCTIONS
After unpacking, check whether the projector has been damaged by transport such
as any screw loosening, reflecting mirror broken, etc. If everything is OK, select a
proper location, hang the projector and adjust its angle properly, then connect the
power cord and the ground wire before switch on at the means. Notice that while
using this projector the green and yellow wire has to connect the ground properly by
Professionals. Please examine the electrics and voltage before power on it. We
suggest customer apply 220V or a transformer. 20 seconds after powered on the
projector, it will self-check and then can be used.
Because of the radiate laser generator 's own characteristic, please terminate it for
10 minutes after using it for 30 minutes to secure the laser 's long life span.
Avoid being interfered by other Signals while using the DMX-512 signal contnoller.
