User manual: CS-400G
Rev: 02/2009
page3 of 6
Operating temperature is 10~35
°C
. Let laser cool off 10minutes after 2 hours of operation,
to ensure maximum lifetime for the diode.
Distance between laser aperture and projection screen should be not less than 1 meter.
Do not turn device on and immediately off again frequently.
Do not look into the laser beam directly, especially not with optical instruments.
Do not touch the device with wet hands.
When the laser diode becomes dim or broken, please contact your dealer timely.
When returning laser to dealer/manufacturer always use original packaging.
Maintenance should be performed every 15-day period. Use a sponge with alcohol, rather
than wet cloth or other chemical liquid, to clean the mirror.
Using the laser
Make sure the correct voltage is used. Connect mains. Connect an emergency switch to the
remote connector on the backside. Turn key switch to on position. Depending on the mode
selected (see below), laser light should come out of the opening on the front panel – be
careful.
Control panel
Operating modes
The following operating modes can be selected from the DIP switch on the backside of the
device:
DIP switch 1-10
Mode
1,0,0,0,0,0,0,0,1,0
Music active, beam effects
0,1,0,0,0,0,0,0,1,0
Music active, animations
1,0,0,0,0,0,0,0,0,0
Automatic mode / beam effects
0,1,0,0,0,0,0,0,0,0
Automatic mode / animations
x,x,x,x,x,x,x,x,x,1
DMX
“Music activ”:
patterns are changed/animated to the beat of the music. Sensitivity can be
adjusted with the knob on the back of the device.
“Automatic mode”:
patterns are changed automatically
“DMX“:
DMX512 Modus-. Use the first 9 switches to select the address:
X
x
x
x
x
x
x
x
x
1
2
4
8
16
32
64
128
256
e.g.
1000 0000 01, DMX mode address 1 (1+0+0+0+0+0+0+0+0+0)
0010 0100 01, DMX mode address 36 (0+0+4+0+0+32+0+0+0)
ILDA mode
When an ILDA compatible interface is connected to the laser, the laser is automatically
switched to ILDA mode. Output is then controlled from a PC running software.
1
Safety switch: laser on/off
2
Remotelock: connect emergency switch. If
no emergency switch is connected use the
9 pin plug supplied.
3
DIP switch: DMX address/mode selection
(see below)
4
DMX 512 in/out
5
Music mode: sensitivity
6
Microphone