6
USING YOUR DETECTOR
POWER SUPPLY
SET UP
OPERATION
▪
The instrument is supplied with one 9v alkaline battery as its
standard power source.
Removing & inserting the alkaline battery
▪
Unscrew the battery compartment screw and remove the battery
cover door and the battery.
▪
Insert the battery according to polarity and replace the battery door.
Powering on
▪
Switch the detector on by pressing the
power
button. The speaker
will emit a small tone to indicate the instrument is operating.
Mounting the staff clamp
▪
Insert the staff clamp screw into the staff clamp thread.
▪
Rotate the nut until the clamp is secured in place.
Speaker function
▪
Press the
speaker
button
to turn the speaker off. Press again to
turn the speaker on and cycle between the speaker volumes.
Operation with a multi-line laser level
▪
Move the detector into the path of the laser beam.
▪
Hold the detector upright for horizontal beams or rotate 90° for
vertical beams.
▪
The LED direction indicators will indicate the position of the laser
beam. The centre LED will indicate alignment with the beam.
This instrument is compatible with all Lasertec red and green
beam multi-line laser levels with detector capability and
most 3rd party red and green beam laser levels with detector
capability. Check the instruction manual of your laser level for
more information on setting up the laser level for detecetor use.
i
