Lasertec HV3R, Инструкция по эксплуатации

Страница: 17 / 28

17
OPERATION (continued)
Setting up a grade / slope
▪ To create a slope / grade, enter into manual
mode by pressing the manual / automatic
mode button on either the instrument or
remote control.
▪ The m anual / automatic mode indicator
on the instrument will light up when manual
mode is active.
▪ To adjust the grade, press the grade
adjustment arrows on either the instrument
or remote control. These arrows will adjust
the grade on either the x-axis or y-axis.
▪ To cancel out of manual mode press the
manual / automatic mode button.
Rotation direction
▪ Whilst the instrument is in scanning mode
press the clockwise or counter clockwise
button to change the rotation of the laser
head.
Tilt alarm
▪ Once the instrument has been levelled off
the tilt alarm can be enabled by pressing the
tilt alarm button. The tilt alarm indicator light
will flash continuously whilst active.
▪ If the instrument is disturbed while the alarm
is active the instrument will stop rotating and
will need to be powered off and on again to
reset its level position.
When in manual mode the instrument
will not self level and correct for
vibrations and/or disturbances.
i