AA-04 Audio Alert Instruction Manual
01379-53-000
Page 8 of 14 Issue 2 25
th
February 2014
Wiring
Figure 4: Terminal Identification
+6 to +24VDC should be applied to J1 (Power) in order to activate the unit and start
the speech routine. Positive should be connected to a +24V terminal and negative to
a 0V terminal.
If the audio signal is required to be outputted to an external amplifier or other audio
device, then the positive and negative terminals of J5 should be connected to the
positive
and
negative
terminals
of
the
external
audio
device.
