08
Completely read through the operating instructions, the „Warranty and Additional Information“
booklet as well as the latest information under the internet link at the end of these instructions.
Follow the instructions they contain. This document must be kept in a safe place and if the laser
device is passed on, this document must be passed on with it.
!
Automatic laser with horizontal 360° laser circle, vertical line and slope function
– The horizontal laser line creates a continuous 360° laser line with the vertical lines
aligned perpendicular to it. Ideal for almost any alignment job.
– Individually switchable laser lines
– OutOfLevel: is indicated by optical signals when the unit is outside its selflevelling range.
– Additional slope function to align angled surfaces
General safety instructions
– The device must only be used in accordance with its intendedpurpose and within the scope of the
specifications.
– The measuring tools and accessories are not toys. Keep out of reach of children.
– Modifications or changes to the device are not permitted, this will otherwise invalidate the approval
and safety specifications.
– Do not expose the device to mechanical stress, extreme temperatures, moisture or significant vibration.
– The device must no longer be used if one or more of its functions fail or the battery charge is weak.
Safety instructions
Using class 2 lasers
– Attention: Do not look into the direct or reflected beam.
– Do not point the laser beam towards persons.
– If a person‘s eyes are exposed to class 2 laser radiation, they should shut their eyes and
immediately move away from the beam.
EN
Laser radiation!
Do not stare into the beam!
Class 2 laser < 1 mW · 635 nm
EN 608251:2014
