EvolutionCross-Laser 8P PowerBright
14
(16)
(16)
(16)
(9,12)
(9,12)
± 2,5°
± 2,5°
auto
slope
3 sec
3 sec
(16)
(16)
(16)
(9,12)
(9,12)
± 2,5°
± 2,5°
auto
slope
3 sec
3 sec
Manual Slope function
This function deactivates the automatic sensor, which enables slopes to be
set. Press the
H slope
button and hold it down for 3 seconds until the auto
LED starts to flash very rapidly. The
V1, V2
buttons are used to re-adjust the
slope by means of a motor. The
H slope
button (pressed briefly) is used to
switch over between axes. IMPORTANT: Since the automatic sensor is not
active, horizontal and/or
ENGLISH
