LaserLiner CondenseSpot XP, Руководство пользователя

Страница: 22 / 76

22
13
Max/Min/AVG mode
,@W,HM 5&LNCDRQDEDQSNSGDHMEQ@QDC
SDLODQ@STQD@MCRGNVSGDL@WHLTLLHMHLTLNQ
@UDQ@FDHMEQ@QDCSDLODQ@STQD6HSGSGDSQHFFDQ
OQDRRDCSGD,@W,HM 5&U@KTDR@QDCDSDQLHMDC
VGHKDLD@RTQHMF3GDU@KTDHRCDKDSDC@MCB@KBT
lated again at the start of a new measurement or
AXOQDRRHMFSGDSQHFFDQ
2-stage warning Sensitivity
„LOW“ „MID“ „HI“
"GDBJj"'*jQ@MFD ± 2°C ‚" ± 5°C
#HROK@X1DCj'(.6j
Detect thermal bridge
± 4,5°C ± 6,5°C ± 8,5°C
$W@LOKD2DMRHSHUHSX`,(#jENQRDSSHMFRDD2DBSHNM
Ambient temperature:
12°C
3GDQL@KAQHCFD
CHROK@XKHFGSRQDCVHSG
acoustic signal
Ambient temperature:
20°C
3GDQL@KAQHCFD
CHROK@XKHFGSRAKTDVHSG
acoustic signal
Ambient temperature:
20°C
Possible thermal bridge,
continue checking area Ambient temperature:
20°C
No thermal bridge
For this purpose, the CondenseSpot XP compares the ambient temperature with the surface temperature.
(ESGDQD@QDK@QFDCHEEDQDMBDRHMANSGSDLODQ@STQDRSGDCDUHBDVHKKSQHFFDQV@QMHMFRHMRS@FDR`"'*jHR
CHROK@XDCHMANQCDQKHMDB@RDRNQSGDCHROK@XKHFGSHMFBG@MFDRSN`AKTDjNQ`QDCjSNHMCHB@SDSGDCHEEDQDMBDR
@QDUDQXK@QFD
In relation to buildings, the term thermal bridge refers to an area, e.g. an inside wall,
at which heat is transferred outwards faster than at the rest of the inside wall. When
UHDVDCEQNLSGDHMRHCDSGDSDLODQ@STQDNESGHR@QD@HRKNVDQSG@MSGDRTQQNTMCHMF
@QD@R@MCVGDMUHDVDCEQNLNTSRHCDGHFGDQSG@MSGDRTQQNTMCHMF@QD@R3GHRNESDM
HMCHB@SDRE@TKSXNQHM@CDPT@SDHMRTK@SHNM
Thermal bridge mode HEAT
12
EN