LaserLiner CombiCross-Laser 5, Руководство пользователя

Страница: 12 / 80

12
1
2
3
1x 1x 1x 1x 1x
V V V V H
GB
Inserting the batteries
Open the battery compartment (9) and
insert the batteries in accordance with
the installation symbols, ensuring the
correct polarity.
Horizontal and vertical levelling
Turn the transport fastener (2) clockwise and release the pendulum lock.
The lasers are now automatically aligned by the pendulum system and the
horizontal laser lights constantly. The lasers can be switched on and off with
the H and V buttons. It is now ready for levelling in the horizontal or vertical
plane.
If the device is too far off the horizontal (more than 2°), the lasers
will blink. Align the device using the adjustable feet (6) or place
on a more level surface. The round vial (8) is provided as an aid
to alignment.
!
The operating time is greatly increased by switching off unnecessary
laser lines.
!
Positioning laser lines
The top section of the laser unit can be turned on the plinth to align the
lasers approximately. Precise positioning can then be done with the Vernier
adjustment (3). The adjustable feet (6) allow the device to be positioned on
sloping surfaces.
Switch on
device
Manual_CombiCross_Laser_5_Rev.0312_DE-SE.indd 12 28.03.12 13:59