LaserLiner BeamControl-Master BCM, Руководство по эксплуатации

Страница: 17 / 64

2.5.1 activate mode
ENGLISH 17
BeamControl-Master BCM
2.3.2 change speed
on rotation laser
with SensoCommander
Note referring to all modes
The red LED lights up when the limit of a range has been
reached (e.g. maximum speed, biggest scan angle).
Rotation mode
Operation
Power
supply
Change of
batteries
3. Batteries / external power supply
3.1 Change of batteries
When the red LED is permanently flashing, the bat-
tery must be changed. For this purpose pull the
lever under the unit slightly downwards. Now the
battery compartment can be drawn forwards and
the batteries can be changed.
3.2
Connection of an external power supply unit to
the rotation laser
When connecting an external power supply unit the batteries will be
bridged. It is not possible to charge storage batteries with the
power supply unit in the rotation unit.
Note
Batteries should not be exposed to excessive heat, such as sunshine, fire or
the like. Moreover, dry batteries must not be charged. Do not throw spent
batteries into your household garbage. You can take them to a collecting
point for spent batteries or special waste. Please, inform yourself about this
at your community. You can deliver batteries with the recycling symbol to the
selling shops, sales agencies or technical service stations.
external power
supply
on rotation laser
with SensoCommander
2.5 Hand receiver mode:
Optimum reception quality by constantly high speed of
(maximum speed = 500 rpm).
Hand receiver
mode
Operation
Note
Note