05
BBQ-GasCheck
EN
FULL
SCAN
EMPTY
1
3
2
Completely read through the operating instruc-
tions, the „Warranty and Additional Information“
booklet as well as the latest information under
the internet link at the end of these instructions.
Follow the instructions they contain. This docu-
ment must be kept in a safe place and passed on
together with the device.
!
Function / application
This scanner finds the level in LPG cylinders made from steel
and aluminium. The level is indicated by a visual signal.
1
Measuring head
2
Signal indicator / battery charge low
3
Battery compartment (rear)
A quality product from
GmbH & Co. KG
Donnerfeld 2, 59757 Arnsberg
Germany, Tel: +49 2932 638-300
Fax: -333, www.laserliner.com
Rev18W24
BBQ-GasCheck
9V x 1 NEDA1604 / 1604A
IEC 006P 6F22/6LR61
Open the battery
compartment on the
housing‘s rear side
and insert a 9V battery.
Correct polarity must
be observed.
1
Insert battery
General safety instructions
– The device must only be used in accordance with its intended
purpose and within the scope of the specifications.
– The measuring tools and accessories are not toys.
Keep out of reach of children.
– The structure of the device must not be modified in any way.
– Do not expose the device to mechanical stress, extreme
temperatures, moisture or significant vibration.
– Do not use the device in environments containing explosive
gases or vapour.
Information on gas cylinders
– The measuring surface and the surface to be measured
of the gas cylinder must be free of dirt, damage, stickers
and rust.
– Observe the safety regulations for handling propane/
butane gas cylinders.
– The measurement is not a substitute for correct residual
gas disposal.
Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic
compatibility regulations and limit values in accordance
with EMC-Directive 2014/30/EU.
– Local operating restrictions – for example, in hospitals,
aircraft, petrol stations or in the vicinity of people with
pacemakers – may apply. There is a possibility of a dangerous
impact on – or interference with – electronic devices.
Electronic devices can potentially cause hazards or interference
or be subject to hazards or interference.
