LaserLiner AutoCross-Laser 3C, Руководство пользователя

Страница: 9 / 68

AutoCross-Laser 3C
Completely read through the operating instructions, the „Warranty and
Additional Information“ booklet as well as the latest information under
the internet link at the end of these instructions. Follow the instructions
they contain.This document must be kept in a safe place and if the laser
device is passed on, this document must be passed on with it.
!
General safety instructions
– The device must only be used in accordance with its intendedpurpose
and within the scope of the specifications.
– The measuring tools and accessories are not toys.
Keep out of reach of children.
– Modifications or changes to the device are not permitted, this will
otherwise invalidate the approval and safety specifications.
– Do not expose the device to mechanical stress, extreme temperatures,
moisture or significant vibration.
Safety instructions
Using class 2 lasers
– Attention: Do not look into the direct or reflected beam.
– Do not point the laser beam towards persons.
– If a person‘s eyes are exposed to class 2 laser radiation, they should shut
their eyes and immediately move away from the beam.
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 635 / 650 nm
EN 60825-1:2014
09
Function / Application
Cross-line laser vertical and horizontal alignment
– The pivoted housing can be turned with a vernier adjustment
mechanism to permit exact positioning of laser lines.
– Adjustable feet with removable rubber caps
– Automatic levelling range 2.5°, accuracy 0,2 mm / m
– A simple, precise plumb function is afforded by the additional
plumb laser at the bottom and the laser cross at the top.
– The vertical lines are aligned at right angles to one another.
EN