12
Completely read through the operating instructions, the „Warranty and
Additional Information“ booklet as well as the latest information under
the internet link at the end of these instructions. Follow the instructions
they contain. This document must be kept in a safe place and if the
laser device is passed on, this document must be passed on with it.
!
General safety instructions
– The device must only be used in accordance with its intended purpose
and within the scope of the specifications.
– The measuring tools and accessories are not toys. Keep out of reach
of children.
– Modifications or changes to the device are not permitted, this will otherwise
invalidate the approval and safety specifications.
– Do not expose the device to mechanical stress, extreme temperatures,
moisture or significant vibration.
– The device must no longer be used if one or more of its functions fail or the
battery charge is weak.
Laser radiation!
Do not stare into the beam!
Class 2 laser < 1 mW · 515 nm
EN 60825-1:2014/AC:2017
Safety instructions
Using class 2 lasers
Intended use
This 3D laser projects one horizontal and two vertical laser circles, and is thus
ideal for aligning objects precisely. The upper and lower laser crosses provide a
plumb function for working simultaneously on floors and ceilings. In the event
of external influences, the unit is switched off by the anti-drift system (ADS-
Tilt) to prevent any incorrect measurements being taken. The 1/4" thread on
the laser and the 5/8" thread on the clamp and wall bracket means that the
device can be used on construction site and photography tripods. The laser has
an integrated hand-held receiver mode for use with an (optional) laser receiver.
EN
