4
GL3000PMC-E LASER
11
Vertical Aiming
Loosen to aim; retighten.
12
Horizontal Aiming
Loosen to aim, retighten.
13
Mounting Holes (2)
Two holes provided to mount
laser to stable surface.
14
Heated Laser Exit Window
Automatically heats entire front of laser
to eliminate snow and ice.
15
Pneumatic Snow Removal Module
Houses the pneumatic valve that sends an air
blast automatically every 5 seconds to keep the
Exit Window clear of snow and ice.
16
Air Blast Nozzle
Directs air blast across the face of the
Exit Window.
17 Redundant Dual LED Emissions Indicator
18
Input Coupling from Air Supply
Accepts 1/4 inch pneumatic hose from
filtered supply line.
19 Mil Spec Connector
Connects control box to laser.
20
Purge Valve Set at Factory
Do not tamper with. Will void warranty.
COMPONENTS & CONTROLS:
GL3000PMC-E LASER
WARNING!
Laser is filled with dry nitrogen to prevent
moisture. Do not open or tamper with purge
valve, front, rear or bottom covers. No user
or non certified persons shall access interior
of laser! Removal of covers will violate IEC
Regulations and Factory Warranty.
15
11
16
12
13
17
14
18
19
20
