LaserLine 290i2, Руководство пользователя

Страница: 14 / 24

Auto-learning function allows you to program new remote controls/electronic keys or cancel lost
remote controls/electronic keys.
To carry out the auto-learning procedure, at least one functioning remote control or electric key
must be available. Then do the following:
Œ
Open the door on the driver’s side;
•
Turn the ignition key ON;
Ž
Press and hold button “A” on the functioning remote control or insert and hold an electronic
key into the receptacle.
•
Now turn off the ignition key and release button “A” or remove the electronic key from the
receptacle. The red LED installed on the dashboard will turn on and remain on, indicating the
auto-learning condition.
•
At this point, press button “A” of all the remote controls or insert the electronic keys into the
receptacle, that you want to store into the alarms memory. The red LED will turn off briefly for
each remote control or electronic key that has been programmed into the alarm memory.
‘
To complete the auto-learning procedure either; turn the ignition ON to exit the function
(291)or wait 10 seconds (290i2) for the LED to go out and then start to flash the emergency
pin code (see the How to Know Your Emergency Pin Code paragraph).
Ø
You can program a maximum of 6 remote controls and 4 electronic keys.
Ø
The remote controls and electronic keys not programmed during the last auto-learning session
will be automatically cancelled by the alarm memory.
Ø
If all remote controls and electronic keys are lost, call your nearest area dealer.
AUTO-LEARNING
ISUT291-213UK.p65 11/05/2006, 18.53 14