1
SETTING UP THE TRACKER
SIM CARD
INSTALLATION METHOD
Install a standard Nano SIM card (4G SIM for LTE network)
according to the SIM card installation method. The SIM card
needs to enable voice, SMS, data services and caller ID service.
Remove the 2 screws then you can use the SIM card pin tool to
remove the cover (please be careful not to damage the coating).
Insert a suitable 4G Nano SIMcard
with the gold side facing upwards
and the diagonal corner facing the
bottom right corner of the tracker.
Remove the 2 screws then you can use the SIM card
pin tool to remove the cover (please be careful not to damage the coating).
Power On:
Press and HOLD the power button until the
motor vibrates.
Power Off:
Tap the power button 10 times continously
(within 5 seconds).
Reboot:
Press the power button for 15 seconds, the
tracker will reboot
Charging the Battery:
Use the magnetic charging lead and attach to the back of the tracker,
connect the other end of the cable to a USB charger
5V 1A / 5V 2A to charge.
Please do not use a fast charger with a 9V output.
A voltage higher than 5V may damage the device.
Note:
