LaserBit LE-PDH-LAN, Руководство пользователя

Страница: 3 / 14

LaserBit Communications Co. Users’ manual of Combiner v.:3.0
- 3 -
About the manual
Copyright © 2003 LaserBit Communications Corp. All rights reserved.
No part of this documentation may be reproduced in any form or by any means or
used to make any derivative work (such as translation, transformation or adoption)
without written permission from LaserBit Communications Corp.
LaserBit Communications Corp. reserves the right to revise this documentation
and to make changes in content from time to time without obligation on the part of
LaserBit Communications Corp. to provide notification of such revision or
change.
LaserBit Communications Corp. provides this documentation without warranty,
term, or condition of any kind, either implied or expressed, including but not limited
to, the implied warranties, terms of conditions of merchantability, satisfactory quality,
and fitness for a particular purpose.
LaserBit Communications Corp. may make
improvements or changes in the product(s) described in this documentation at any
time.
This Manual represents information required to install, configure and use the
LaserBit LE- PDH-LAN Combiner.
Trade Marks
LaserBit is a registered trade mark of LaserBit Communications Corp. All other
trademarksbelong to their respective owners.
About the combiner
The LaserBit LE-PDH-LAN combiner provides cost effective solution for combining
the Telephone networks through a PBX with a ITU-T G.703 E1 output and local
computer networks on 100BaseT 100 Mbps IEEE 802.3.
Combiner is providing two different connection points for Ethernet 10/100 Mbps and
E1 2,048 Mbps. On this way it provides two different connections on the same
output. The output is a 150Mbps Fiber, which provides different installation
distances.
Features:
-
Easy to use
-
Simplified connection to meet all the requirements.
-
Full Duplex 100Mbps for LANs at the speed of 80Mbps
-
E1 connection
-
150Mbps fibre output