SPK-QC001
4
USER MANUAL
button. When audio mode is ON, press the MODE/POWER button to select the type of
audio playback as displayed on screen: BT (Bluetooth), FM (FM Radio) or AUX (3.5mm
Audio cable).
To turn OFF the audio mode press and hold the MODE/POWER button again until the
audio mode icons (BT, or AUX or FM) disappear from screen. (You can now access the user
settings for the alarm clock radio as described later on in this manual)
AUTO DIMMER LCD DISPLAY
Your SPK-QC001 has an auto dimming display, when in low light conditions such as next to
your bed at night.
SETTING THE TIME (From Clock Radio Mode)
Press the MODE button. The hour digit will now blink
Set the hours by pressing the – or + buttons
Short press the MODE button again. The minute digit will now blink.
Set the minutes by pressing the – or + buttons again
Short press MODE or wait 15 seconds to return to the clock view
12 HOUR/24 HOUR MODE (From Clock Radio Mode)
Press and hold the OK button to switch from 12 hour mode to 24 hour mode
TEMPERATURE DISPLAY (From Clock Radio Mode)
To switch the temperature display from Celsius to Fahrenheit, press the – button and the +
button at the same time (The room temperature display is accurate to +/- 3 degrees)
WIRELESS CHARGING
Note: First ensure wireless charging in turned on, on your compatible Qi enabled Smart
Phone. (Refer to the end of this manual for various Qi enabled Smart Phones)
Place your Smart Phone on the center pad, at the top of your SPK-QC001. The indicator
light will turn ON while charging.
Note: Due to the nature of wireless charging, devices may get warm to touch while
charging. Wireless charging is unavailable in FM mode.
USB CHARGING
There are 3 USB ports at the front of the alarm clock. Simply connect your portable device
using a USB cable to begin charging.
AUDIO MODE - BLUETOOTH MODE
- Press and hold the MODE button to enter the audio mode. The first MODE by default, is
Bluetooth mode.
- You will see letters BT begin to blink on the LED display, followed by a confirmation sound
that your SPK-QC001 is ready to pair.
