TRIPOD ASSEMBLY
•
Loosen knob unfold all three legs from the
tripod and place on a level surface. Then tighten
the knob to secure the tripod base after
adjusting to your desired height.
•
Insert extension pole into lower pole. Do not
extend pole more than 30cm.
•
Adjust your desired height within 30cm range,
insert safety pin into extension pole & tighten
knob on extension pole.
•
There is a hole in the bottom of the speaker.
Carefully insert the bottom of the speaker onto
extension pole.
Warning:
Speaker sits on tripod only. They are not securely
attached. To move speaker & tripod, you must carry
them separately
