Laser BLU-BD1000, Руководство пользователя

Страница: 19 / 45

BLU-BD1000
USER MANUAL
18
CONNECTING THE PLAYER
CONNECTING A USB DEVICE
Requires a USB Flash drive or an external USB HDD (not included).
1. Insert the USB drive (or cable) into the
USB port on the front of the player.
2. To access the content of the USB device
for playback please see the Media
Center section later in this manual.
NOTE: The USB ports are rated to provide a maximum of 5V, 500mA power to
the USB drive. It is sufficient for all USB thumb drives and flash memory card
readers, but may not be sufficient for USB hard disks. It is recommended that
you use a USB hard disk with an external power supply.
This unit supports “USB Mass Storage Class Bulk-Only Transport” devices only.
Most USB thumbs drives, portable hard disk drives and card readers conform
to this device class. Other USB devices such as MP3 players, digital cameras,
and mobile phones may not be compatible.
Supported USB drives must be formatted with the FAT (File Allocation Table)
or FAT32 file system.
In some cases, an incompatible USB device may cause the player to stop
responding. If this occurs simply turn off the power, remove the USB device,
and turn the player back on.
The player accesses the USB drive in read and write mode. In order to
minimize the risk of data corruption, it is recommended that you only unplug
the USB device when playback is completely stopped.