Laser AO-LED18BLK, Руководство пользователя

Страница: 2 / 5

PRODUCT FEATURES
1.Power consumption:
≤ 0.5W
2.Working voltage: DC 3.7V
3.Charge Voltage: DC5V/500mA
4.Impedance:32
Ω
5.Frequency range:20Hz-20Khz
6.Sensitivity:90db
7.Charging time:2-3hours
8.Play time: FM/TF mode (4--5hours without led flashing), Bluetooth mode(3-4hours
without led flashing),with led flashing ,playtime 2-3 hours.
9.BT version: 2.1+EDR
10.Audio decoding format: MP3
11.Microphone sensitivity: -32db
12.FM RANGE: 87.5-108.0MHZ
13.Working range: 10 -15 meters without blocking
14.Micro SD Max support: 16G
INTRODUCTION
Thank you for purchasing the LASER LED BLUETOOTH HEADPHONE. Please read the
manual carefully before using this device. Keep the manual for your further
reference.
OPERATION
Fully charge the headphone battery for the first time use. To charge, insert the micro
USB Cable into the charging port and connect to a power source. When it is charging,
the indicator light will glow red. After it had finished charging, the indicator light will
go off. It takes 2-3 hours to charge.
When the headphone is running out of battery, an alarm sound will be heard. Please
charge the battery immediately. If the headphones are used after this warning, the
will automatically turn off after 3-5 minutes.
POWER ON/OFF
1. Power ON: Slide the power ON/OFF switch to ON, the LED will flash blue and red.
2. Power OFF: Slide the power ON/OFF switch to OFF, then the headphones go off.
LED FLASHING
1. The LED lights could react to the music
2. While you are listening to music ,the led lights will flash automatically. If you do