Laser Tools 5167, Инструкция по эксплуатации

Страница: 5 / 8

Turning off:
1. If you do not use the wrench for 150 seconds the tool will turn off automatically.
2. To manually turn off the wrench press the On/Off button (
E ) button and hold for
approximately 3 seconds.
3. The next time the torque wrench is switch on, the last used manually set torque
figure (not a pre-set) will be remembered.
LED Backlight illumination:
1. Press and release the On/Off button (E) to switch the LED backlight on or off.
Changing the Batteries
The torque wrench is powered by two (2) AAA batteries (2 x AAA supplied).
1. The battery cover is on the reverse of the instrument body. Open battery cover by
undoing the two screws (PH1 screw).
2. Install 2 x AAA batteries with negative (-) end against spring.
3. Screw the cover firmly into place.
4. If the battery is in poor condition the ( ) icon will appear.
5. Dispose of batteries according to local authority guidelines.
6. Always remove batteries if the tool is stored and not in constant use.